All Categories

  • All Categories
  • Fascia Board
  • White 16mm Fascia Board
  • White 9mm Capping Fascia Board
  • White 9mm Bullnose Window Sill
  • White 9mm Ogee Capping Fascia Board
  • Rosewood 16mm Fascia Board
  • Black Ash 16mm Fascia Board
  • Light Oak 16mm Fascia Board
  • Rosewood 9mm Capping Fascia Board
  • Black Ash 9mm Capping Fascia Board
  • Light Oak 9mm Capping Fascia Board
  • Anthracite Grey 9mm Capping Fascia Board
  • 2.500mm Product Half Lengths
  • Soffit Board
  • White Soffit Board
  • Rosewood Soffit Board
  • Light Oak Soffit Board
  • Black Ash Soffit Board
  • Anthracite Grey Soffit Board
  • External Cladding
  • Architrave Window Trims
  • White Window Trim
  • Rosewood Window Trim
  • Light Oak Window Trim
  • Black Ash Window Trim
  • Anthracite Grey Window Trim
  • Guttering
  • Half Round Guttering & Downspout
  • Square Guttering & Downspout
  • Dry Verge
  • Wall Ceiling Cladding
  • Marbrex Roomliner & Trims
  • Marbrex Internal Wall,Ceiling Cladding
  • Marbrex & Shower Panel Finishing Trims
  • Shower Panels
  • Wetwall Panels
  • Polyboard Window Sill & Accessories
  • Polyboard Window Bottom Cill
  • Fixings
  • Silicone Sealant
  • Ventilation
  • Accessories

SOUDAL SOLVENT FREE T-REX GRAB ADHESIVE SEALANT HIGH STRENGTH FIBRE 310ML

Availability: In Stock

T-REX SOLVENT FREE IS A FIBRE REINFORCED HIGH STRENGTH CONSTRUCTION ADHESIVE WITH EXTREMELY HIGH INITIAL GRAB (OVER 300KG/M²) AND HIGH BOND STRENGTH. ESPECIALLY SUITABLE FOR POROUS MATERIALS.CHARACTERISTICS- Fibre reinforced- Initial grab higher than 300kg/m²- EC-1R Plus label: very low emission values- Solvent free- Suitable for bonding on uneven surfaces- Direct application onto one substrate- E...


£2.59

T-REX SOLVENT FREE IS A FIBRE REINFORCED HIGH STRENGTH CONSTRUCTION ADHESIVE WITH EXTREMELY HIGH INITIAL GRAB (OVER 300KG/M²) AND HIGH BOND STRENGTH. ESPECIALLY SUITABLE FOR POROUS MATERIALS.
CHARACTERISTICS
- Fibre reinforced
- Initial grab higher than 300kg/m²
- EC-1R Plus label: very low emission values
- Solvent free
- Suitable for bonding on uneven surfaces
- Direct application onto one substrate
- Excellent adhesion on a wide range of construction materials both in interior and exterior applications
APPLICATIONS
- Suitable for immediate and rock solid bonding of many materials such as wood, many plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB, timber panels, chipboard etc.
- Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.
DIRECTIONS FOR USE
Method: Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15 cm. for panels). Always apply adhesive to the
edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required. The bond can
be loaded after 24-48 hours.
Application temperature: +5°C to +35°C
Clean: with water if not cured, mechanically if cured
Repair: with same material